Serpentine Belt Service at Spring Street Automotive Inc in Quincy

If you've ever heard a squealing sound under your vehicle hood, chances are it was your serpentine belt. More importantly, the belt powers the alternator. The alternator creates electricity that's used by your vehicle's electrical systems and also charges the battery. Without the alternator, the battery will go dead after a short distance.

The serpentine belt may also run the pumps for both the power steering (some are electric) and power brakes (some use vacuum boost).

And, on most vehicles, the serpentine belt powers the water pump. The water pump circulates coolant through the engine to keep it within optimal operating temperatures. On some Quincy vehicles, the water pump is powered by the timing belt instead of the serpentine belt.

When they understand what it does, Quincy drivers realize that if it breaks, it affects a lot of systems. That's why vehicle manufacturers outline recommended replacement guidelines in the owner’s manuals. If this important maintenance component is not included in your owner’s manual, come see us at Spring Street Automotive Inc.

At Spring Street Automotive Inc in Quincy, your professional technician can perform a visual inspection of the belt to see if it has any cracks that signal the belt could fail soon. If the belt has more than three or four cracks every inch or couple of centimeters, has deep cracks that penetrate half the depth of the belt, is frayed, is missing pieces or has a shiny, glazed look, it needs to be replaced regardless of age or mileage.

If it has lost a significant amount of thickness, it also needs to be replaced. Talk to your service advisor at Spring Street Automotive Inc. There's a special spring-loaded pulley attached to the engine called the tensioner pulley. Its job is to make sure there's a constant tension on the serpentine belt so that it doesn't slip. The spring can become worn and no longer provide the necessary pressure to keep the belt tight. At Spring Street Automotive Inc, we recommend that the tensioner be replaced at the same time as the serpentine belt.

As mentioned, a squealing sound could alert you that the serpentine belt needs to be replaced. It may be loose if you hear a slow, slapping sound when idling your vehicle.

All in all, the serpentine belt is very important to the operation of your vehicle. And it's not that expensive to replace at Spring Street Automotive Inc – so it's good to do so before it fails.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

Gear Up: Transmission Service at Spring Street Automotive Inc in Quincy

The transmission system in your vehicle allows you to change gears. Lower gears are power gears. They get your vehicle moving and get it up hills. Higher gears get the vehicle up to speed and get it rolling faster. If you have a standard transmission, then you have to do the work of shifting gears yourself. But with an automatic transmission, the vehicle shifts gears on its own. It automatically starts out in low gear and automatically shifts to high gears as it gets rolling. Again, it will automatically shift to a lower gear to climb hills or when you need a burst of speed.

How does it know when to change gears? Today's automatic transmissions are computer-controlled. The computer gathers information about what the vehicle is doing and changes the gears as needed.

Automatic transmissions are becoming more sophisticated all the time. More gears, or “speeds,” are being added. Almost all vehicles have at least four speeds. Five or six is common. Some are even increasing to seven or eight – up to ten. Adding gears has a lot of advantages for Quincy vehicle owners: it improves fuel economy and increases performance.

But there is a drawback for drivers in Quincy: more gears equal more parts and a more complex transmission system. Plus, all those parts need to fit into the same space as older, less complex transmissions. This means that today's transmissions are engineered to much tighter tolerances. In other words, they demand meticulous care from Quincy drivers. Transmissions are designed for durability. But that durability can be compromised if they aren't given proper care.

That's why changing transmission fluid is such an important part of preventive maintenance for vehicles in Quincy. Transmission fluid lubricates the transmission and keeps it in good working order. But if the fluid runs low, transmission parts will wear out quickly or suffer damage due to increased friction. The transmission can even fail.

Dirty transmission fluid can clog the small passageways in the transmission, blocking lubricant from reaching all of its parts. Again, this can lead to increased wear, damage or failure.

New transmissions aren't cheap. Repairing them isn't cheap either. But changing transmission fluid is fairly inexpensive at Spring Street Automotive Inc in Quincy. That's why responsible car care includes maintenance on the transmission system at Spring Street Automotive Inc. It doesn't take a genius to figure out that periodic fluid changes aren't just good auto advice, they actually pay for themselves by preventing transmission repairs.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

What's in a Number? (What Tire Numbers Mean)

You've probably never paid much attention to the writing on the sides of your tires, but they contain a wealth of information.  There's a long combination of letters and numbers that can tell you a whole lot about what tires your vehicle was designed to be riding on.  Let's check out this example found on an SUV: P245/70R17 108T.

The first letter, P, means it's intended for passenger vehicles.  If there's no letter, it means it's a metric tire.  If there's an LT at the beginning or end that means a tire designed for light trucks.

Moving on to our example, the 245 shows how wide the tire is in millimeters from sidewall to sidewall.  The number that follows in our example, 70, means the height of the tire is 70% of its width.  The letter after that in our example, R, describes the type of tire (on this vehicle, radial).  Following that is the diameter in inches, in our SUV example, 17 inches. 

How much load the tires' sidewalls are designed to take is what that next number is all about (108 in our example).  The higher the load index, the more weight the sidewalls can take.  And the last letter is the speed rating of the tire, in our example, T.  The further along in the alphabet that letter is, the higher its speed rating.  So now you know what those letters and numbers mean.  But why are they important?

When you are getting ready to replace those tires, those numbers are telling you what the original equipment was when your vehicle was new.  Sticking with the same rated tires is always a good idea.  If you don't know what you're doing, trying different sized tires and wheels can cause real issues when it comes to performance and safety, considering all the computerized systems now found on vehicles.  When in doubt, consult your service advisor when it comes to buying new tires.  He or she knows what those tire numbers and letters mean… and a whole lot more.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

The Daily Grind (Grinding Noise)

If your vehicle makes a grinding sound when you turn the steering wheel, it's speaking to you.  No, really, it is.  So listen to what it's saying and you could avoid a much more costly repair down the road.

A grinding sound coming from the front of your vehicle when you are turning can offer some very informative clues as to what's going on.  One cause could be that there's a problem with the mechanical linkage that enables you to turn the wheels.  Another is that the hydraulic system that makes turning the steering wheel easier may have its own problems. 

Think of it.  Hydraulic power steering has many components that need to work in tandem.  The power steering fluid may be too old and contaminated.  Or its level may be low. That may be caused by a leak somewhere in the system. A technician can check things over to find out exactly what's happening.

Other causes of grinding while turning can be problems with the suspension in the front.  You may have a failing CV (constant velocity) joint.  It could be your brakes are partially engaging while you are turning.  That metal-on-metal sound is never a sign that things are working just the way they're supposed to.

To a technician looking to pinpoint the problem with your vehicle, it's not a daily grind at all.  Experience and training will help her or him zero in on what's causing the noise and get you back on the road. Maybe you can enjoy your sound system more after that distracting background noise has disappeared!

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com