The Flat Fix that Fits (Tire Repairs)

Can you think of anyone who likes getting a flat tire?  Of course not.  But when one of your tires winds up with a flat or leak, whether it be from things like hitting a curb, running over a nail or picking up a sharp stone, it's time to have someone who knows what they're doing take care of it.

If you're thinking you'd like to avoid having to buy a new tire, you wonder if a patch or plug will suffice.  It depends where the puncture is and how big the hole is.  Most tire experts will say if the hole in the tire is less than ¼ of an inch or 6 mm, a patch can work.  But a patch likely won't work if the compromised part of the tire is on its shoulder or sidewall.

Here's why.  The shoulder of a tire is the part between the sidewall and tread and it's usually rounded.  It's under a lot of pressure, more than even the sidewalls. And because of that curved shape, it's hard to get a patch or plug to hold.

The sidewall is the side of the tire.  Sidewalls flex a lot when you drive, and the strain can cause a patch or plug to loosen up.  A weak spot in a sidewall is much more likely to fail and cause a blowout.  So if you have damage in the sidewall or shoulder, that tire is a good candidate for replacement, not repair.

If you have a cut or gash in your tire, it's possible the cords that strengthen your tire have also been cut.  That weak spot can spell trouble, and this type of damage usually means you should get a new one.

Your service advisor can tell you what the appropriate action is to take when you have tire damage.  You may be able to get good results with a patch, or you may have to replace one or more tires.  Your safety is riding on them.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

Don't Be Shocked (Shock Absorbers)

If you've ever ridden down a rough road on your bicycle, you know how hard a ride it can be.  Yet drive down the same road in your car, truck or SUV and it miraculously will smooth out the ride.  That's because it is equipped with shock absorbers.  They are built to dampen impacts from road irregularities.  But after taking hundreds of hits from potholes, railroad tracks and curbs, your shock absorbers can wear out.  Besides the rough ride that can cause, there are other ways your vehicle's performance can be affected.

When it comes to braking for example, you may take a longer distance to stop.  That's because shocks help keep your tires in contact with the surface of the road.  If the shocks aren't working properly, the tires won't make contact like they should.  So when you slam on the brakes, your vehicle will take longer to stop.

Consider what worn out shocks are doing to your tires.  Since the bumps aren't being dampened as much, your tires can bounce up and down more.  That can produce a problem of uneven wear called cupping.

And when you start out from a stop, your vehicle may not have the traction it should since the shocks aren't keeping them down on the road as you accelerate.  If you have front wheel drive, you may lose some steering control on acceleration. Obviously, many of these things involve safety concerns.

Pay attention to any deterioration in your vehicle's ride quality.  If your vehicle is starting to bounce up and down and its ride feels bumpier than before, head on over to your vehicle service facility and get your suspension checked out.  Do the same if steering response isn't as good as it used to be.  Notice that your vehicle nose dives when you brake?  Are your tires wearing in an unusual manner? All are signs that your shocks may be on their last legs.

If the last time you replaced your shocks was 50,000 miles/80,000 kilometers ago, a technician should evaluate them.  Don't be "shocked" if it's time for new ones.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

Conventional or Synthetic? (Switching to Synthetic Oil)

If you keep up on technology trends, then you may be intrigued about synthetic motor oil.  It was introduced in the 1960s when Mobil came up with it.  Mobil's oil was different from conventional motor oil because it was first broken down to its basic molecules.  Then, Mobil removed additional impurities from crude oil and "tailored them to the demands of modern engines."

Synthetic oil is becoming more popular now because of its advantages over conventional oil. It's more resistant to sludge forming in an engine.  It is more efficient and protects engines better under temperature extremes.  Because it allows drivers to go longer between oil changes, many feel it's more convenient. 

The downside is that synthetic oil is more expensive, but because it doesn't need changing as often, the cost can be pretty comparable in the long run.

Those who drive high performance vehicles (think Audi, BMW, Mercedes) are already using synthetic oil if they're following their manufacturer's guidelines.  Other manufacturers recommend a synthetic blend.  So for those who are using conventional oil, you may want to consult your service advisor for some recommendations if you want to switch to synthetic. 

If you're the type who always waits until the last-minute or doesn't ever get in quite in time for the recommended oil change interval, the longer gap required between changes with synthetic oil may appeal to you.  In some cases, you can go up to 15,000 miles/24,000 km between changes. 

If you drive in a very cold climate, synthetic oil can flow more easily at startup and may offer quicker engine protection.  On the other hand, in hot climates, synthetic oil can resist heat breakdown better.

Or you may be one of those drivers who have been getting along fine with conventional oil changes.  Millions do.  Just remember that changing your oil is considered the most important maintenance you can do on your vehicle, so make sure it's done at the right time and with the oil that best suits your driving needs.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

It's Brake Time (Brake Calipers)

Race car drivers have demonstrated the advantages of disc brakes, so most modern vehicles use them.  Sometimes just the front wheels have disc brakes, but many vehicles now have them all the way around. 

A major component of the disc brake is called a caliper.  It works by squeezing brake pads against the disc or rotor, kind of like a bicycle hand brake.  The brake pads themselves are what contact the rotor, causing friction to build and the wheel to slow down, but it's the calipers that apply the pressure to the pads.

Caliper design has evolved over the years, and there are two common types.  One is called a floating caliper.  It has one or two pistons on one side of the disc. When you push down the brake pedal, the piston or pistons in your caliper put pressure on that one side.  A mechanism connected on the other side of the disc applies pressure as well, squeezing your disc so the vehicle stops.  Floating calipers are less expensive since they have fewer parts.

The other type is called a fixed caliper.  They use pistons on both sides of the disc, sometimes several.  They are often used in more high-performance or heavy-duty vehicles.

Calipers can have rubber seals to keep out dirt, debris and moisture, but when that rubber wears out, sometimes the calipers can get contaminated.  They can stick or start leaking; they can even rust.  Then your caliper can get stuck applying that "squeeze" when you are not pressing on the brake pedal.  Or they can get stuck in the other position, not applying stopping power when you press the pedal.

When this happens, it's not unusual to feel your vehicle pull to one side when you brake.  You might notice a burning smell from the constant friction if the caliper is stuck on, plus you may feel the heat from the wheel after you park and get out of your vehicle.  Sometimes you'll hear a high-pitched sound or clunk if your calipers are binding up. 

That's your cue to have them checked out at your vehicle service center.  If your calipers aren't working correctly, it can be a safety hazard.  Sticking calipers can affect your ability to steer and stop; this is the kind of "brake time" you need so you can get them back on track and working properly.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

What is a TPS? (Throttle Position Sensor)

You know you have an accelerator pedal; step on it and your vehicle is supposed to go.  But did you know there is a part in your vehicle that keeps track of where the throttle is? It's called the Throttle Position Sensor, or TPS.

The TPS is a sensor that helps your vehicle figure out the right mix of air and fuel is reaching your engine.  It does that by keeping track of the throttle and sending that information to your vehicle's computer.  Other factors play a role in how well your engine is performing, including air temperature, how fast the engine is turning over and air flow. 

When the TPS isn't working right, you may find your vehicle won't accelerate or doesn't have the power you're expecting when you press on the accelerator.  In some cases, it may accelerate on its own.  Sometimes your vehicle won't go over a certain speed.  Your Check Engine light may go on.

Any of these symptoms should be checked out soon.  If your TPS stops working right, your vehicle may not be safe to drive.  Fortunately, most vehicles have a "limp home" mode that will allow you to get off a busy road to a safe spot. 

Your service advisor can let you know which TPS is the correct replacement for your vehicle.  Your shop may have to re-program the new TPS so it works correctly with other software in your vehicle.

It's a fact of life these days that computers control many of a vehicle's functions. The sensors that feed information to those computers help make your vehicle work the way it was engineered to and keep you motoring down the road safely and efficiently.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com