The Truth about Tire Pressure (Tire Inflation)

Most light vehicles (under 10,000 pounds/4,500 kg) in North America sold from 2008 model year on have a feature that many people are confused about.  It's the tire pressure monitoring system (TPMS).  You may have some experience with it yourself if you own a newer vehicle.  Vehicles with TPMS have sensors in each tire that are supposed to warn the driver when tire pressure gets dangerously low.  That's important because tires that are significantly under-inflated can cause very serious accidents.

Unfortunately, many drivers think the TPMS does all the work keeping track of tire pressure. To them, as long as the warning light or gauge isn’t giving a warning, the tires must have the proper amount of air pressure in them.  That's not the case.

Tire pressure monitoring systems aren't all created equal.   Some give you a digital readout of the pressures in each individual tire.  But many simply have a warning light that looks like the cross section of a tire with an exclamation point in the middle.  If you don't know what it is, it's because it's not instantly recognizable as a tire.  In fact, one company that makes TPMS, Schrader Performance Sensors, surveyed drivers.  Their study showed that more than 40 percent of drivers didn't know that that warning light was. 

One out of 5 of the drivers who did know what the light was only looked at their tires after the light came on to see if they could see any that needed air; they never checked them with a tire gauge or had someone else do it.  Ten percent of them didn't do anything when the light came on.

In most vehicles with TPMS, the warning comes on only when the tires are more than 25% underinflated.  The American Automobile Association says that's under the pressure you need for safe vehicle operation.

The bottom line is once a month you should make sure your tires are inflated to the manufacturer's recommendations.  That means each tire should be measured with an accurate, external tire gauge.  To be confident you are getting a correct reading, take your vehicle to a reputable service facility where their equipment is calibrated and they know what they're doing.

Severely underinflated tires can contribute to an accident that kills or severely injures people.  The idea behind TPMS is well intended, but the system was never meant to replace regular inflation measurements and maintenance.  Periodically have your tires checked for proper inflation.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

What Is an EGR Valve? (EGR Valve Service)

If you've ever felt your vehicle hesitate, go, then hesitate again, you might think there's something wrong with the transmission.  After all, it's not moving smoothly  down the road.  But there are plenty of malfunctions that can cause those symptoms, one of them being something you may have never heard of: the EGR valve.

EGR stands for Exhaust Gas Recirculation. It's a system that channels small amounts of exhaust back into the engine to cool down the cylinders and reduce polluting gases.  Those include nitrogen oxides that can cause smog. The EGR valve regulates how much of the vehicle's exhaust gas is recirculated. After years and long distances traveled, that valve can get clogged or fail. Sometimes the EGR valve can stick open.  When the EGR valve isn't working properly, your vehicle can start releasing those nitrogen oxides and pollute the air.

The symptoms of a malfunctioning EGR valve include:

• Engine losing power
• Engine idling roughly
• Pinging and knocking sounds in the engine
• Stalling and hesitation
• Fuel economy decreasing
• Check Engine light illuminated

Depending on its condition, the EGR valve can be cleaned or it may need to be replaced.  Consult with your service advisor to see what options are recommended to you.

The EGR system is part of your vehicle's pollution and emissions control equipment. If you care about keeping our planet's atmosphere clean, you'll want to make sure it's doing its job—for everyone's benefit.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

Everything You Ever Wanted to Know About Wheel Bearings

Why are wheel bearings for Quincy vehicles important? It's simple: your wheel bearings keep the wheels on your vehicle. In today's Spring Street Automotive Inc post, we'll discuss more about wheel bearings and how you can make sure they can do their very job while you drive around Quincy, IL.

Wheel bearings are pretty simple parts. They're made of high quality steel and are engineered to last 100,000 miles (160,000)  or more if properly cared for. The bearings do two jobs: First, they allow the wheel to freely rotate with as little friction as possible. Second, they support the weight of the vehicle. For example, if your car weighs 3,600 pounds (1600 kilogram), each wheel has to support approximately 900 pounds (400 kilograms). That's a lot of heavy lifting over those long distances.

Even though wheel bearings are pretty straightforward, they need to be in near perfect condition to do their job for Quincy vehicles. The bearings are packed with heavy grease to lubricate and protect them. A seal keeps the grease in and water and dirt out. It's when the seal starts to leak that problems begin. The grease can become contaminated, causing the wheel bearings to overheat and ultimately fail.

The first sign that your wheel bearings are in trouble is an unusual noise coming from a wheel. It could be a chirping, growling, rumbling or a cyclic sound. The noise could get louder or even disappear at certain speeds. Your technician at Spring Street Automotive Inc can inspect for bearing wear by lifting the vehicle and checking for play in the wheel.

Now some wheel bearing assemblies are factory sealed. That means that they cannot be serviced – they can only be replaced. Those that aren't sealed can be serviced on schedule at Spring Street Automotive Inc. The bearings are removed, cleaned and inspected. If the bearings are still good, they're re-installed – if not, they're replaced. They are then packed in grease and a new seal is installed.

If your vehicle has a factory sealed wheel bearing assembly, the entire assembly needs to be replaced when trouble arises. Unfortunately, the parts are pretty costly – but they usually last about 150,000 miles (240,000 kilometers) as long as the seals hold up.

Now, even a good seal cannot keep out water that's exerting pressure on the seal. So if you've driven through hub-deep water, your bearings should be cleaned and repacked if they're serviceable. If you have factory sealed bearings, you just need to watch for signs of premature failure. If your wheel bearings can be serviced, your manufacturer's owner's manual will recommend an interval, usually around 30,000 miles (50,000 kilometers).

If you have any sort of trailer, don't forget its wheel bearings. They probably need to be serviced even more frequently. This is especially true for boat trailers that are used to launch the boat by backing it into the water. These should be serviced every year, usually at the end of the season so that the bearings don't have the opportunity to rust all winter.

So what happens to Quincy vehicles if wheel bearings fail? Well, the wheel can literally fall off the vehicle. I don't need to tell you how that could be. So check with your service advisor at Spring Street Automotive Inc and see if your vehicle's wheel bearings can be serviced and when it's recommended. Listen for warning signs. If you've been fording streams or puddle surfing after rainstorms, be especially vigilant.

Visit the automotive professionals at Spring Street Automotive Inc for a wheel bearing inspection. 

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

Automotive Tips from Spring Street Automotive Inc: A Broken or Damaged Timing Belt

The timing belt rotates the cam shafts which open and close the valves that allow air, fuel, and exhaust to flow through the engine as it powers your car when you drive around Quincy.

An old timing belt can lose a “tooth” in the belt allowing it to slip. The engine could stop or misfire. Timing belt slips – or a broken timing belt – can be disastrous on some engines. In “interference” engines, open valves can get in the way of the piston when the timing belt breaks or slips. When that happens one or more valves can be bent requiring expensive engine repairs.

It is important for Quincy drivers to replace their timing belts as recommended in their owner’s manual to avoid unnecessary breakdowns. Ask the team of professionals at Spring Street Automotive Inc in Quincy if it’s time for your timing belt to be replaced.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com