Don't Blow a Gasket! (Valve Cover Gasket Replacement)

When you head out to your vehicle after it's been parked and notice oil leaking underneath it, that's something to have looked at right away.  Oil leaks mean your oil level is probably low and running a vehicle in that condition can lead to expensive repairs.

While there are many reasons oil leaks develop, one possibility is a bad valve cover gasket.  Vehicle engines have a cover bolted over the spot where the engine valves are, and that cover keeps the oil inside the engine. In between the cover and the engine is a gasket that keeps that seal tight.  But after many years of high engine temperatures and vibrations, that gasket or the bolts that hold on the valve cover can fail or loosen, and oil can leak.

You may see dirty oil on the valve cover in the engine compartment, near the spark plugs, or around the bolts that hold the valve cover on.  All those are signs of leakage and time to bring your vehicle in for our technicians to check out.

In some vehicles, taking off the valve cover and replacing the gasket is a relatively easy job. In some models, though, other engine parts are located near that part of the engine and must be removed to get at the gasket, so repair costs can vary widely.

The technician will measure to make sure the valve cover isn't warped so it can be reused. If it is warped, they'll recommend replacing it with the gasket.  

While the technician has that area of your engine accessible, they will also check to see if other components need replacing at the same time, which could save you money.  And because valve cover gaskets usually fail in older vehicles, the technician will check for other oil leaks then, too. 

One of the best ways to be sure your valve cover is doing its job is to have your vehicle regularly maintained.  The technician will periodically look over your engine compartment and make sure you know when things are showing signs of age and wear BEFORE they fail and leave you stranded.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

Keeping Yourself in Suspension (Control Arm Assembly Replacement)

When you are pointing your vehicle straight down the street, it should go straight.  That’s pretty straightforward, right? Sometimes, though, you may notice you have to keep adjusting the steering wheel to keep going straight.  While that could be caused by many different issues, one possibility is that you have a failing or bent control arm.

Another sign is that when you brake, your vehicle pulls to one side or the other.  Sometimes your suspension may sound noisy, especially when you’re traveling on rough surfaces.  A damaged control arm may also make it almost impossible for you to get a good wheel alignment. 

The control arms are part of your suspension, and some vehicles have upper control arms and lower control arms.  Not all have the same number of control arms, but one thing is important: If you have worn bushings on your control arms or a worn-out ball joint, the control arm on the other side should also be replaced.  The rubber bushings are susceptible to damage from age and exposure to the elements, and ball joints usually shouldn’t be replaced separately. 

Any time you have a suspension issue, it’s important that a technician inspects the other parts of your suspension as well.  If one part of it is showing its age, it’s not unusual for other components to show similar wear.  

One other thing.  If you’ve had one of your control arms bent or damaged in an accident, you must have it replaced.  Your suspension is an important part of your vehicle’s safety and handling, so you should keep it in good operating condition.  After all, your life is riding on it, literally.   

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

Hey Quincy Drivers: How Do You Save Gas?

Higher Quincy fuel prices aren't going away any time soon. That's not good news for our wallets. A lot of Quincy drivers are trying to find ways to cut down on fuel consumption and hang on to some of their hard-earned money.

North Americans drive billions of miles less during months of high fuel prices. That's right, billions. Of course IL vehicle owners can't stop driving altogether, so we still need to find other ways to cut fuel bills.

Preventive maintenance at Spring Street Automotive Inc in Quincy and good vehicle care can actually pay for themselves by lowering our fuel consumption. Here's a real-life example of how that can work.

A family planned a four-day camping trip. Before leaving, they took their SUV into Spring Street Automotive Inc for an oil change. They flushed the cooling system, serviced all three differentials and cleaned the fuel system. They replaced the PCV valve and breather element. Then they checked the tires to ensure they had enough air.

This was several hundred dollars in maintenance and repair. You may be thinking how the family could possibly recoup the cost in gas and save money. First of all, the repairs all needed to be done anyway. Even if the costs aren't recouped, many of them will pay for themselves by preventing even more costly repairs later. Also, the family had planned and budgeted for the routine maintenance, so it didn't cut into their trip allowance.

The SUV pulled a one-ton trailer and hauled everything the family needed on their camping trip. At the end of the trip, the owner was surprised to learn the SUV had actually gotten better gas mileage than it ever had before—even with that heavy load. The repairs and maintenance at Spring Street Automotive Inc had improved the gas mileage by 25%! The family saved $48.00 in gas on their four-day trip. And they are continuing to reap rewards from the improved mileage.

So what can you do to save fuel? First, stay caught up on routine maintenance at Spring Street Automotive Inc. Almost every maintenance item listed in your owner's manual will maintain or improve your fuel economy. Second, take your vehicle into Spring Street Automotive Inc for scheduled tune-ups. And third, take care of needed repairs. You may be surprised at how much you save at the pump and probably with the improved vehicle performance as well.

If your Check Engine light is on, find out why and take care of it. Some of the problems that set off that warning light can seriously reduce fuel efficiency.

As you schedule preventive maintenance, don't forget your tires. Proper tire pressure and wheel alignment are both essential to good fuel economy.

Here's some more auto advice about some simple things you can do to improve fuel economy, beyond maintenance and repairs:

Dump the junk. More weight in your car equals more fuel. You'd be surprised how much stuff people carry around in their cars. That adds up to a lot of extra fuel. One hundred pounds of extra stuff in your vehicle can add up to the loss of one mile per gallon of fuel.

Get the lead out. No, don't speed up, slow down. Get the lead out of your right foot. The single biggest drain for most Quincy vehicles is speeding or sudden accelerations. Slow down and go easy on turns and lane changes, and don't treat every stoplight and stop sign like a green flag. These small changes can add up to quite a bit of change in your pockets.

We haven't mentioned the pills you can drop in your gas tank or special devices you can hook on your fuel line in order to increase fuel efficiency. There's a simple reason for that: they don't exist. There may be some truth behind some of these claims, but most of them are full-out scams. And if any of these things do actually help, it's not nearly as much as the things we've listed here.

Be smart. Your vehicle and your wallet will thank you for it.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

Round and Round (Wheel Balancing)

In a perfect world, all wheels and tires would be perfectly round and weigh exactly the same at every point of the wheel.  Unfortunately, they're not, and if they're out of balance, they can reduce the lifespan of your tires, make your vehicle shake like a carnival ride, and maybe even damage a few suspension parts along the way.  You don't want that!

Wheel balancing, sometimes known as tire balancing, is a process by which a technician makes sure your tire/wheel assembly has evenly distributed weight.  If it isn't, it can give your ride bad vibrations.  If you feel your vehicle's steering wheel shaking, it can mean unbalanced wheels in the front. If you can feel a vibration in your seats, it could be unbalanced rear wheels.

In addition to your vehicle vibrating at higher speeds, there are other signs that your wheels are out of balance. You may see uneven tread wear, or you may notice you aren't getting the kind of fuel economy you used to. 

When you experience these problems, bring your vehicle in, and we can put your wheels on a machine designed to detect any imbalance.  The technician will start your wheels spinning, and a computer will determine how much weight is needed where.  Then, the technician can add small weights on the inside or outside of your wheel rim to precisely balance out the uneven weight.  When the wheel is balanced correctly, it will spin evenly and smoothly.

Sometimes your vehicle will hit a pothole or object in the road that dislodges one of those weights, which can throw that wheel out of balance again.  If so, you'll have to bring it in to have that corrected

Some drivers confuse wheel balancing with wheel alignment. Alignment is making sure the wheels are perpendicular to the road and parallel with each other.  Sometimes your vehicle will need both balancing and alignment done at the same time.

No vibrations are good vibrations when it comes to your wheels.  Bring your vehicle to us, and we'll perform a balancing act to keep your vehicle riding smoothly down the road.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com