Unlock the Secret (Malfunctioning Door Lock Actuator)

What a convenience power door locks are on a vehicle.  The latest don't even require you to push the button on the key fob; all you have to do is have it with you.  But sometimes there's a component of power door locks that can fail, especially when they are used several times each day.  Those are called the door lock actuators.

The actuator is an electric part that works with others (like motors and gears) to lock and unlock doors.  You can hear them work, sometimes with the little whirr of the gear or the quiet clunk of the lock finishing its cycle.  And it's good to pay attention to that sound because if it starts to sound different, it could be a signal that your lock is on the brink of failing. Another sign of a failing power door lock actuator is they start working intermittently or quickly and erratically.  The driver's door is often the first to start acting up since it's the one that usually gets the most use.

When you start to notice these signs, consider a visit to your service facility to get your vehicle checked out.  If you wait too long, you may find yourself getting locked out of your vehicle. Many vehicles do have mechanical keys available as a failsafe so you are at least able to get inside.  Some of them are hidden inside the key fob and you should know how to access them.  Check with your owner's manual or ask your service advisor.

It's extremely inconvenient to have to unlock your vehicle with the mechanical key, then get inside and unlock the other doors. It's even more inconvenient if you have passengers in the rear seats.  And that doesn't even count having to go through the same thing to lock the doors when you arrive at your destination.

There are many things that can cause power door locks to malfunction, but if it turns out to be a power lock actuator, the most common remedy is to replace it.  Some are easier for technicians to reach than others, depending on your vehicle's design.  But once your locks are working again, you might think you've found the "key" to happiness!

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

Command Performance (Engine Air Filter)

The internal combustion engine in your vehicle counts on two things that mix together to be burned in the engine for power: fuel and air.  Both are important, of course.  If you run out of fuel, your engine won’t run at all.  Since there’s plenty of air around, you won’t run out of air, but you could feel your vehicle’s performance suffer if the engine air filter starts to get clogged. 

It's important that the air that enters your engine be free of dirt, dust, and debris to prevent damage to internal components.  That’s where the engine air filter comes in.  It prevents those particles from entering the engine, an important job that most people just take for granted.

After a while, your air filter will get dirty, which results in less air reaching the engine.  Modern fuel injected engines can adjust the amount of gas to mix with the air that is getting in, so your fuel economy won’t change significantly.  What will change is how well the engine performs, its acceleration.  In one test, a US Department of Energy study showed that a dirty air filter reduced a vehicle’s get-up-and-go by as much as 11 percent.  

The company that made your vehicle includes guidelines in your owner’s manual on how frequently that filter should be changed, and doing so will maintain your engine’s performance. If you drive in dusty, dirty areas or those with a lot of industrial pollution, we recommend you replace the engine air filter more frequently than the manufacturer’s recommendations.  

When you bring your vehicle to us for regular maintenance, we will routinely check several components, including your engine air filter, and recommend a change when we see signs it’s needed. It’s good for your engine, and you’ll enjoy the performance you expect.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

That Vexing Vapor Venting (Vapor Coming out of Vents)

You may have noticed sometimes on a hot and humid day, vapor will come out of your vehicle's vents when you have the air conditioning on.  Is that something to be concerned about? Well, it depends.

Sometimes that steam or vapor can be caused by water accumulating in the vent system after it has condensed.  And sometimes water can pool at the bottom of a vent.  When you turn on the blower mower, the air hits the water and may create steam or vapor that you can see in the cabin.

One thing to check is if that vapor smells like anything.  If it doesn't, that's a good sign. You may be able to run the fan for a while and the issue may just go away when things dry out.  But moisture collecting in the ventilation hoses in a hot vehicle may be a breeding ground for mold, and that can have health consequences.

There's another possibility. Ventilation systems often have drains to get rid of any accumulated water, and debris can sometimes clog them.  A technician can clean out those drains and you'll be back in business.

One thing to nose around for is a sweet smell coming out of your vents.  Sometimes the heater core (a component of your vehicle's heater system) can develop very tiny holes.  That sweet smell may be coolant that's been vaporized by those tiny holes entering your cabin. 

It's always a good thing to mention to your service advisor any abnormality you're seeing—or smelling—in your vehicle.  By venting a little about your vents, a technician can get to the bottom of the problem before it starts "clouding" the issue.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

Cool Running (Water Pump)

Your vehicle is like you in a way.  When it gets hot, it needs to be cooled down.  And one of the key parts to keeping it cool is the water pump.

Now, that's a bit of a misnomer.  It IS a pump, but it's pumping coolant, not pure water.  Cooling off your engine is vital since it builds up heat when it creates power by burning fuel.  Your water pump acts as a way to recirculate that coolant.  It goes through a series of tubes and hoses through the engine where it picks up heat, then is sent off to the radiator to get rid of that heat.  Cooled off, the coolant is recycled through the water pump to start the journey again.

The water pump works by taking mechanical power from the engine, usually from a belt.  Obviously, that belt has to be in good condition and adjusted properly or else the water pump won't be able to do its job.

Here are some things to look for that will signal problems with your water pump.  If your heat gauge is erratic or showing a much higher than normal temperature, that could be a sign of trouble.  Another is if you hear a whine under the hood.  And if that gets louder when you go faster, get it checked right away.  You may see steam coming out from under the hood or coolant may be leaking. 

These signs signal that it's time for you to have a technician check to see where the problem is. Some water pumps are powered by a timing belt.  If your vehicle has that design and your timing belt is due for replacement, sometimes it's a good idea to replace the water pump too, even if it's working properly.  That's because the labor to replace the timing belt can be expensive and it may be wise to proactively take care of the water pump while it's disassembled.

Your service advisor will explain the options available and offer the best path to keeping your water pump doing its job.  Your engine's life depends on it.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com

Braking Good (Brake Drum Replacement)

Maybe your vehicle feels like Breaking Bad.  In other words, when you brake, things are bad.  You may find it takes you a longer distance to stop, you feel a vibration, or it’s pulsating when you depress the brake pedal, or perhaps your vehicle pulls to one side.

Those can be symptoms of failing brake drums.  While a lot more vehicles these days have disc brakes, many vehicles still have brake drums, almost always in the rear wheels. The drum is a cast iron shallow cylinder that surrounds the other parts, including curved brake shoes that press pads against the drum to slow you down or stop the vehicle.

Any time you have things going wrong with your brakes, you should get them fixed soon.  Safely operating any vehicle depends on having the brakes be able to slow and stop you dependably.  It can make the difference between avoiding a collision and having one. 

When you bring your vehicle in, a technician will inspect your braking system. Depending on the wear, drum brakes can be resurfaced or replaced. Sometimes it’s cheaper to replace the drum than to resurface it.  It’s important for all the other brake system components to be inspected first and all worn parts replaced.  

Most of the time, when you have your drums resurfaced or replaced, the brake shoes should be replaced at the same time. You have brakes at each end of your axles, and the same brake service should be done at both ends so that both sides can have consistent, even stopping power. 

Your brakes can save your life.  If their braking power is bad, you owe it to yourself and others on the road to let us help make them good again.  Good and safe.

Spring Street Automotive Inc
1701 Spring Street
Quincy, IL 62301
217-228-9141
http://www.springstreetauto.com